Portuguese (Brasil) [Portuguese (Brazil)]
Supplies and Parts
Service and Support
TallyGenicom | Frequently Asked Questions - Integrated Print Management
6800 Family of Line Printers
6800 Printer Lineup
6800 Enclosed Pedestal
6800 Open Pedestal
6800 Table Top Cartridge
6800 Zero Tear
Arabic Context Analyzer (ACA)
FAQ: 6800 Cartidge Printer Family
FAQ: 6800 Consumables
FAQ: 6800 Integrated Print Mgmt
Line Matrix Versus Laser
Line Matrix Versus Dot Matrix / Serial
6600 Family of Line Printers
6600 Printer Lineup
6600 Open Pedestal Line Matrix Printer
6600Q Front Paper Access
6600Q Surestak Power Stacker
6600Q Sliding Rear Drawer Video
6620Q Speed Test
6600Z Zero Tear
6600Z Zero Tear Line Matrix Printer
FAQ: 6600 Zero Tear
6600 Quiet Pedestal
6600 Quiet Pedestal Line Matrix Printer
FAQ: 6600 Printer Family
FAQ: 6600 Vs. 6200/6300
FAQ: 6600 Consumables
FAQ: Integrated Print Mgmt
FAQ: 6600 Zero Tear
Voice of Customer
YRC - Logistics
Procurity - Pharma
Rawson - Manufacturing
Innovations & Advantages
Line Vs. Laser
Line Vs. Serial
Printronix Thermal Printers
Integrated Print Management Frequently Asked Questions.
Can I track ribbon usage on the 6600?
Yes. The printer keeps track of the quantity and types of all ribbons used on the machine. This log can be checked at any time, and viewed remotely via PrintNet Enterprise, to determine how fast and how many ribbons your operation is consuming.
The display on my 6600 now says "Ribbon Life = 100%",what is this?
This display tells you how much life is remaining on the cartridge ribbon. It is fully automatic and does not require any set up or additional procedures to work. Just load and change ribbons when necessary. It can then tell when new ribbons are loaded and adjust the life display accordingly. Now it is possible to gauge how much longer you have before you need to change ribbons or if you have enough capacity to finish the job
How does the printer know when a ribbon is loaded and what type it is?
Each cartridge contains a small electronic chip that tells the printer the type of ribbon and its remaining life.
Can I view the ribbon life indication remotely?
Yes. PrintNet Enterprise allows users to view ribbon life anywhere remotely via a simple web browser. PrintNet Enterprise can also be set to issue your web enabled portable device an e-mail when ribbon live is low and again when the ribbon has been depleted.
Will the ribbon life indication remain accurate if a variety of jobs are run?
Yes. The system uses a sophisticated algorithm that tracks usage in all the various sections of the ribbon automatically. As print patterns shift, it will use different parts of the ribbon, but this is tracked and properly accounted for.
If I exchange partially used ribbons before they are depleted will the ribbon life indication remain accurate?
Yes. A ribbon can be taken off and replaced at any time, and the system will correctly tell you the ribbon life remaining on the currently loaded ribbon.
What happens when the ribbon life reaches the end?
The life indication will continue to count down. The system will signal
Low Ribbon Life
condition. The indicator lamp will flash, the warning message will be displayed, and an optional email alerts will be issued. Printing will continue without interruption. After the remaining two percent is consumed the printer will stop, preventing print quality from degrading below the set limit. The error lamp will flash, the audible alarm will sound, the display will indicate that the ribbon needs to be replaced, and an optional an email alert will be issued again.
At what point is the ribbon low warning issued?
Like the darkness set point, this is fully adjustable. The factory default is to declare Ribbon Low at 2% life remaining.
If my ribbon life reaches zero and the printer stops, can I at least finish my printing?
Yes. By returning the printer to an online state, it will resume printing for approximately two more minutes. This process can be repeated indefinitely to extend printing as long as desired.
Can I change the point at which the system tells me to change the ribbon?
Yes. This is totally adjustable and can be set to match your application requirements.
Can I program my printer not to stop if the end of ribbon life is reached?
Yes. Under the Advanced User section of the printer menus, you can select an option to ignore the ribbon end point. The ribbon life indication will continue to work, but no warnings will be issued and the printer will not stop once the life reaches 0%. Responsibility for ensuring the proper change interval reverts back to the user.
© Copyright 2012